 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Ordering number : ENN7911A FTD2019A FTD2019A Features * * * * N-Channel Silicon MOSFET Transistor Load Switching Applications Low ON-resistance. 2.5V drive. Mount height 1.1mm. Composite type, facilitating high-density mounting. Specifications Absolute Maximum Ratings at Ta=25C Parameter Drain-to-Source Voltage Gate-to-Source Voltage Drain Current (DC) Drain Current (Pulse) Allowable Power Dissipation Total Dissipation Channel Temperature Storage Temperature Symbol VDSS VGSS ID IDP PD PT Tch Tstg PW10s, duty cycle1% Mounted on a ceramic board (1000mm2!0.8mm)1unit Mounted on a ceramic board (1000mm2!0.8mm) Conditions Ratings 30 12 6 40 1.3 1.4 150 --55 to +150 Unit V V A A W W C C Electrical Characteristics at Ta=25C Parameter Drain-to-Source Breakdown Voltage Zero-Gate Voltage Drain Current Gate-to-Source Leakage Current Cutoff Voltage Forward Transfer Admittance Static Drain-to-Source On-State Resistance Input Capacitance Output Capacitance Reverse Transfer Capacitance Symbol V(BR)DSS IDSS IGSS VGS(off) yfs RDS(on)1 RDS(on)2 RDS(on)3 Ciss Coss Crss Conditions ID=1mA, VGS=0V VDS=30V, VGS=0V VGS= 8V, VDS=0V VDS=10V, ID=1mA VDS=10V, ID=6A ID=6A, VGS=4V ID=3A, VGS=3.1V ID=3A, VGS=2.5V VDS=10V, f=1MHz VDS=10V, f=1MHz VDS=10V, f=1MHz Ratings min 30 1 10 0.5 7.8 13 19 21 23 1430 195 190 26 32 34 1.3 typ max Unit V A A V S m m m pF pF pF Marking : D2019A Continued on next page. Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN 61005PA MS IM TB-00001472 / 93004 TS IM TB-00000046 No.7911-1/4 FTD2019A Continued from preceding page. Parameter Turn-ON Delay Time Rise Time Turn-OFF Delay Time Fall Time Total Gate Charge Gate-to-Source Charge Gate-to-Drain "Miller" Charge Diode Forward Voltage Symbol td(on) tr td(off) tf Qg Qgs Qgd VSD Conditions See specified Test Circuit. See specified Test Circuit. See specified Test Circuit. See specified Test Circuit. VDS=10V, VGS=4V, ID=6A VDS=10V, VGS=4V, ID=6A VDS=10V, VGS=4V, ID=6A IS=6A, VGS=0V Ratings min typ 24 165 110 130 19 3.2 4.5 0.83 1.2 max Unit ns ns ns ns nC nC nC V Package Dimensions unit : mm 7006-002 3.0 Electrical Connection 8 7 6 5 8 5 0.95 0.65 0.425 0.95 1 4 0.25 1.0 0.125 0.05 1 : Drain1 2 : Source1 3 : Source1 4 : Gate1 5 : Gate2 6 : Source2 7 : Source2 8 : Drain2 SANYO : TSSOP8 1 : Drain1 2 : Source1 3 : Source1 4 : Gate1 5 : Gate2 6 : Source2 7 : Source2 8 : Drain2 Top view 1 2 3 4 Switching Time Test Circuit VIN 4V 0V VIN ID=6A RL=2.5 VDD=15V 6.4 4.5 D PW=10s D.C.1% 0.5 VOUT G FTD2019A P.G 50 S No.7911-2/4 FTD2019A 6 ID -- VDS 5.0V 8 ID -- VGS VDS=10V 2.5 V 7 6 5 4 3 2 1 4.0V 5 Drain Current, ID -- A 3.0 V 4 3 Drain Current, ID -- A 2 1 0 0 0.05 0.10 0.15 0.20 0.25 0.30 0.35 0.40 0 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 Drain-to-Source Voltage, VDS -- V 60 IT07368 40 Gate-to-Source Voltage, VGS -- V --25C VGS=1.5V Ta=7 5C 25C IT07369 RDS(on) -- VGS RDS(on) -- Ta Ta=25C Static Drain-to-Source On-State Resistance, RDS(on) -- m 55 50 45 40 35 30 25 20 15 10 0 2 4 6 8 10 IT07370 10 7 5 3 2 1.0 7 5 3 2 0.1 7 5 3 2 2 3 5 7 0.1 2 3 5 7 1.0 2 3 5 7 10 IT07372 0.01 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 IT07373 10 --75 --50 --25 0 25 50 75 100 125 150 175 Static Drain-to-Source On-State Resistance, RDS(on) -- m 35 6A ID=3A 30 25 20 5V =2. GS .1V ,V 3A =3 I D= , V GS 3A V I D= =4.0 , VGS 6A I D= 15 Gate-to-Source Voltage, VGS -- V 5 yfs -- ID Ambient Temperature, Ta -- C IT07371 IS -- VSD VGS=0V Forward Transfer Admittance, yfs -- S 3 2 VDS=10V 3 2 1.0 7 5 3 2 0.1 0.01 = Ta 5C --2 C 75 Drain Current, ID -- A 10000 7 5 SW Time -- ID VDD=15V VGS=4V Ciss, Coss, Crss -- pF 5 3 2 Ciss, Coss, Crss -- VDS f=1MHz Diode Forward Voltage, VSD -- V Switching Time, SW Time -- ns 3 2 1000 7 5 3 2 100 7 5 3 2 10 0.001 2 3 5 70.01 23 5 7 0.1 1000 7 5 3 2 td (off) tf tr td(on) 100 23 5 7 1.0 23 5 7 10 IT07374 0 5 10 15 20 25 30 IT09859 Drain Current, ID -- A Drain-to-Source Voltage, VDS -- V 75 C 25 C --2 5C C 25 Source Current, IS -- A 10 7 5 Ta = Ciss Coss Crss No.7911-3/4 FTD2019A 4.0 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0 0 2 4 6 8 10 12 14 16 18 20 VGS -- Qg VDS=10V ID=6A Drain Current, ID -- A Gate-to-Source Voltage, VGS -- V 100 7 5 3 2 10 7 5 3 2 1.0 7 5 3 2 0.1 7 5 3 2 ASO IDP=40A 1m s 10 <10s 0 s ID=6A DC Operation in this area is limited by RDS(on). 10 op era tio 10 0m s ms n( Ta = 25 C ) 0.01 0.01 Ta=25C Single pulse Mounted on a ceramic board (1000mm2!0.8mm) 1unit 23 5 7 0.1 23 5 7 1.0 23 5 7 10 23 5 Total Gate Charge, Qg -- nC 1.6 IT07376 Mounted on a ceramic board (1000mm2!0.8mm) 1unit Allowable Power Dissipation (FET1), PD -- W PD -- Ta Drain-to-Source Voltage, VDS -- V 1.4 1.3 1.2 IT07377 PD -- PD Allowable Power Dissipation, PD -- W 1.4 1.3 1.2 1.0 0.8 0.6 0.4 0.2 0 0 20 40 60 80 100 120 140 160 M ou nte do 1.0 na ce ram To t ic al 0.8 bo 1u Di ard ss ni ip (1 t ati on 0.6 00 0m m2 !0 0.4 .8m m) 1u 0.2 0 0 0.2 0.4 0.6 0.8 1.0 nit 1.2 1.3 1.4 IT07379 Ambient Temperature, Ta -- C IT07378 Allowable Power Dissipation (FET2), PD -- W Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of June, 2005. Specifications and information herein are subject to change without notice. PS No.7911-4/4 |
Price & Availability of FTD2019A
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |